Specifications
| Material | Calcium silicate |
|---|---|
| Colour | Grey |
| Length (overall) | 1000 mm |
| Width (overall) | 610 mm |
| Thickness | 25 mm |
| Fire classification | A1 |
| Density | 225 kg/m³ |
| Manufacturer | Skamol |
| Origin | European Union |
| Food contact | No |
| Contains wood | No |
Pack of 8 Anti-Damp silicate boards
|
Get rid of damp and mould problems for good! |
En stock
Volume discounts
| Quantity | Unit discount | You Save |
|---|---|---|
| 4 | 5% | €62.82 |
| 9 | 10% | €282.69 |
| 18 | 15% | €848.07 |
| 26 | 20% | €1,633.32 |
| 36 | 25% | €2,826.90 |
Related products:
Overview:
"SkamoWall Basic Anti-damp" calcium silicate boards are the ideal solution to the recurring problems of humidity, damp, mould and bad odours regularly found in poorly or barely ventilated rooms such as basements, garages, cellars and so on.
They act as a humidity regulator: thanks to their high capillarity, they allow moisture to move from the cold side of the wall to the warm side, where it evaporates into the room until a point of equilibrium is reached.
➡️ SkamoWall Basic lets you reduce your energy consumption by up to 70 % compared with an uninsulated brick wall.
Characteristics:
✅ Lightweight, smooth material that is easy to cut (woodworking tools, etc.)
✅ Can take fixings by screwing or plugging.
✅ Ecological building product.
✅ Once fitted, the substrate is solid, hard-wearing and self-supporting.
✅ Easy fitting, can be done by one person.
✅ Rated A1, it meets the most demanding fire classification, EN 13 501.
✅ Non-combustible product.
Pack contents:
8 "damp-proofing" calcium silicate boards of 1000 x 610 x 25 mm, i.e. 4.88 m²
Instructions for use:
- Unlike the calcium silicate boards used for the thermal insulation of wood stoves, fireplaces, flues and so on, "damp-proofing" silicate boards can be glued directly onto the existing substrate (brick wall, concrete blocks, etc.) using the special silicate adhesive sold on our site (applied to the substrate with a tiling comb, for example).
- Their light weight and composition mean they can be used without a metal frame, which avoids any damage caused by the difference in expansion between materials.
- For building boxings, window surrounds and so on, the boards can be fixed with conventional plugs and screws.
- Once glued and fixed, it is advisable to fill the joints between the boards with the special silicate adhesive.
- Applying thespecial silicate primer with a roller or brush will guarantee good adhesion of thespecial silicate render.
- This can be applied in 2 coats: a first coat to smooth out any irregularities and the joints between the boards, and a second, thinner coat (which can be pigmented) for the finish.
The render can also be painted, using an acrylic paint or a water-based paint that will not block the pores of the material and thus lets the calcium silicate breathe.
