Specifications
| Material | Calcium silicate |
|---|---|
| Colour | Grey |
| Length (overall) | 1000 mm |
| Width (overall) | 610 mm |
| Thickness | 50 mm |
| Fire classification | A1 |
| Density | 225 kg/m³ |
| Manufacturer | Skamol |
| Origin | European Union |
| Food contact | No |
| Contains wood | No |
Calcium silicate board "Moisture-resistant" - 1000 x 610 x 50 mm
Get rid of damp and mould problems for good!
This very light yet rigid insulating board regulates humidity, prevents mould from forming and reduces heat loss in rooms with little or poor ventilation.
En stock
The minimum purchase order quantity for the product is 2.
Volume discounts
| Quantity | Unit discount | You Save |
|---|---|---|
| 7 | 5% | €23.28 |
| 18 | 10% | €119.73 |
| 36 | 15% | €359.19 |
| 54 | 20% | €718.37 |
| 72 | 25% | €1,197.29 |
Related products:
Description:
"Moisture-resistant SkamoWall Basic" calcium silicate boards are the ideal solution to the recurring problems of humidity, damp, mould and unpleasant odours regularly found in poorly or little-ventilated rooms such as basements, garages, cellars...
They act as a humidity regulator: thanks to their high capillarity, they allow moisture to move from the cold side of the wall to the warm side, where it evaporates into the room until a point of equilibrium is reached.
➡️ SkamoWall Basic can reduce your energy consumption by up to 70% compared with an uninsulated brick wall.
Characteristics:
✅ Lightweight, smooth material, easy to cut (woodworking tools...)
✅ Holds screw or plug fixings.
✅ Environmentally friendly building product.
✅ Once installed, the substrate is solid, strong and self-supporting.
✅ Easy installation by a single person.
✅ Classified A1, it meets the most demanding fire classification, EN 13 501.
✅ Non-combustible product.
Instructions for use:
- Unlike the calcium silicate boards used for the thermal insulation of wood stoves, fireplaces, flues..., "moisture-resistant" silicate boards can be glued directly to the existing substrate (brick wall, concrete blocks...) using the special silicate adhesive sold on our website (applied to the substrate with a notched tile trowel, for example).
- Their lightness and composition allow them to be used without a metal frame, which avoids any damage caused by differential expansion between materials.
- For building boxing, window surrounds..., the boards can be fixed with standard plugs and screws.
- Once glued and fixed, it is advisable to fill the board joints with the special silicate adhesive. Use fully threaded wood screws.
- Applying, with a roller or brush, the special silicate primer will ensure good adhesion of the special silicate render.
- This can be applied in 2 coats: a first coat to smooth out any irregularities and the board joints, and a second, thinner coat (which can be tinted) for the finish.
The render can also be painted with an acrylic or water-based paint that will not clog the pores of the material, allowing the calcium silicate to breathe.
