Specifications
| Colour | Taupe |
|---|---|
| Grain size | 0 - 1 mm |
| Maximum service temperature | 1300°C |
| Setting type | Ceramic |
| Net weight | 2 kg |
| Origin | European Union |
Refractory clay mortar 1300 °C - Universal HKM - 2 kg tub
Universal 1300 °C ceramic-setting refractory clay mortar, with a particle size of 0 - 1 mm, used for laying firebricks or as a repair mortar in masonry heaters, wood stoves, fireplaces... In a 2 kg tub.
En stock
Volume discounts
| Quantity | Unit discount | You Save |
|---|---|---|
| 5 | 5% | €3.22 |
| 12 | 10% | €15.45 |
| 24 | 15% | €46.35 |
| 36 | 20% | €92.71 |
| 48 | 25% | €154.51 |
Related products:
The Universal HKM refractory mortar is a ceramic-setting refractory clay mortar for universal use, usable in all phases of building a masonry heater.
✅ Usable from the combustion chamber (core) to the outer envelope (cladding).
✅ Ceramic set: it is the (fairly high) rise in temperature that will cause the ceramic set of the joints (the joints may remain a little soft until the first firing)
✅ Sticky product with very good adhesion both during application and in use
✅ Can be used in joint thicknesses of 3 to 20 mm.
✅ Same expansion as HBO+ grog, no stress on the stone
Characteristics:
- Taupe colour
- Grain size 0 to 1 mm.
- Application temperature 1300 °C
- Ready to use
- Can be stored indefinitely under cover between + 5 °C and + 40 °C
Application advice:
- Apply to dust-free materials
- Dry mix before adding water
- Mix vigorously by hand or, better, with a mixer
- Mix with clean water (approximately 7 to 7.5 l of water per 25 kg bag depending on the desired consistency)
- Leave to stand for 30 minutes after mixing and before application, or wait longer, then stir again.
- Usable for 4 weeks after mixing if stored away from air
