Specifications
| Colour | White |
|---|---|
| Grain size | 0 - 1.2 mm |
| Maximum service temperature | 600°C |
| Setting type | Hydraulic |
| Net weight | 20 kg |
| Manufacturer | Brunner |
| Origin | European Union |
| Food contact | No |
| Contains wood | No |
Universal 600 white mortar - render, 20 kg bag
Universal 600 from Brunner is a white, fine-grained, fast-setting refractory mortar used both for building and for rendering the cladding of masonry heaters, heat-storage fireplaces and so on.
Hydraulic-setting and formulated from lime and marble, it can be used in areas exposed to up to 600 °C.
En stock
Volume discounts
| Quantity | Unit discount | You Save |
|---|---|---|
| 5 | 5% | €16.56 |
| 12 | 10% | €79.50 |
| 24 | 15% | €238.51 |
| 36 | 20% | €477.01 |
| 48 | 25% | €795.02 |
Related products:
The Universal 600 white mortar / render from Brunner is the all-round product to have on all your jobs, ideal:
✅ For laying the bricks and slabs of masonry heater claddings
✅ For rendering the cladding of masonry heaters, fireplaces and heat-storage stoves.
⚠️ Universal 600 is not suitable for contact with flames! If you are looking for a white mortar that withstands higher temperatures, use our 1100° white refractory mortar
Characteristics:
- Operating temperature: max. 600°C
- Grain size: 0 - 1.2 mm
- Hydraulic setting
- Working time: approx. 30 minutes
- Consumption: 1.5 kg per m² for a thickness of 1.2 mm
- Mixing water: 230 ml to 370 ml of drinking water per kg, depending on the desired consistency
- Minimum ambient temperature during use: above 5°C
⚠️ Maximum render coat thickness: 50 mm
Instructions for use:
- Mix small quantities in a bowl with clean tap water using a spatula to a creamy consistency and apply quickly.
- For large application areas, mix slowly with a mixer, leave to stand for 2 to 3 minutes and use within 30 minutes.
- Warm mixing water and/or a warm substrate speed up the setting time.
⚠️ Do not remix a mortar that has started to set; dispose of it with the site waste!
Important notes:
- Keep the substrate dry, dust-free and grease-free
- In the case of wet cuts, remove the cutting slurry and let the residual moisture evaporate
- There is no need to wet the substrate: use as little water as possible
- Maintain a working temperature > 0°C
- Carry out the rendering in accordance with good practice.
? Always heat masonry heaters and masonry heating surfaces before rendering or jointing!
Packaging:
In 20 kg bags and on pallets of 48 bags.
Storage:
Store in a cool, dry place at a temperature above 0 °C. Under these conditions, the product can be kept for 12 months.
