Specifications
| Material | Grog |
|---|---|
| Appearance | Smooth |
| Colour | Beige |
| Length (overall) | 600 mm |
| Width (overall) | 110 mm |
| Thickness | 60 mm |
| Alumina content | 40 % |
| Maximum service temperature | 1750°C |
| Density | 2.25 g / cm³ |
| Quality | Pressed |
| Net weight | 8.9 kg |
| Manufacturer | Made in France |
| Origin | France |
| Food contact | Yes |
| Contains wood | No |
| Weight per unit | kg |
Dense refractory lintel 600 x 110 x 60 mm - 40% alumina
This lintel is used to span openings in firebrick constructions of masonry heaters and other wood-burning heating appliances.
Thanks to its high alumina content, it withstands very high temperatures.
En stock
Volume discounts
| Quantity | Unit discount | You Save |
|---|---|---|
| 10 | 5% | €18.84 |
| 25 | 10% | €94.20 |
| 50 | 15% | €282.60 |
| 75 | 20% | €565.20 |
| 100 | 25% | €942.00 |
Related products:
Overview:
Thanks to its high alumina content, the product can be in contact with the flames and thus withstands high temperatures over long periods.
It also has excellent mechanical strength
Dry-pressed, this dense lintel has a high density and a low dimensional tolerance of approximately 2 mm.
Please note: the colour may vary from light beige to orange-beige depending on the firing.
Technical characteristics:
Bulk density: 2.25 g/cm³
Open porosity: 23 %
Mechanical strength: 35 MPa
Pyrometric cone equivalent: 1750 °C
Creep of 0.5% under a load of 2 kg/cm²
Composition:
Al² O³: 40-44%
Ti O²: 1.8 %
Fe² O³: 2 %
Instructions for use:
It can be cut using a (wet) table saw or a disposable disc.
A diamond disc can be used, but it must be watered at the same time, otherwise it would wear out almost instantly.
