-20%
Specifications
| Material | Grog |
|---|---|
| Colour | Black |
| Length (overall) | 220 mm |
| Width (overall) | 55 mm |
| Thickness | 50 mm |
| Alumina content | 37 % |
| Maximum service temperature | 1710°C |
| Density | 2.25 g / cm³ |
| Net weight | 1.5 kg |
| Manufacturer | Made in France |
| Origin | France |
Black dense firebrick 220 x 55 x 50 mm - 37% alumina
Ideal for building a masonry heater or a heat-storage fireplace, this high-quality "soap" type firebrick offers an aesthetic advantage thanks to its black colour (shaded with grey / brown).
It is mainly used for building ovens and barbecues, lining boilers and fireplaces, flue ducts, etc.
En stock
The minimum purchase order quantity for the product is 3.
Volume discounts
| Quantity | Unit discount | You Save |
|---|---|---|
| 50 | 5% | €12.54 |
| 250 | 15% | €188.10 |
| 375 | 20% | €376.20 |
| 500 | 25% | €627.00 |
Related products:
Overview:
This slab can be used to build other parts of your firebox and also for the cladding of your heat-storage stove.
Thanks to its high alumina content, the product can be in contact with the flames and thus withstands high temperatures over long periods.
It also has excellent mechanical strength and is ideal as a baking hearth in a wood-fired oven or a barbecue, for baking bread, pizzas and so on.
Technical characteristics:
- Bulk density: 2.25 g / cm³
- Open porosity: 23 %
- Mechanical strength: 35 MPa
- Pyrometric cone equivalent: 1750 °C
- Creep of 0.5% under a load of 2 kg/cm²
Composition:
- Al² O³: 35 - 37%
- Ti O²: 1.8%
- Fe² O³: 2%
Instructions for use:
It can be cut using a (wet) table saw or a disposable disc.
A diamond disc can be used, but it must be watered at the same time, otherwise it would wear out almost instantly.
