Specifications
| Material | Grog |
|---|---|
| Appearance | Smooth |
| Colour | Orange beige |
| Length (overall) | 220 mm |
| Width (overall) | 110 mm |
| Thickness | 60 / 40 mm |
| Alumina content | 35 % |
| Maximum service temperature | 1710°C |
| Density | 2.1 g / cm³ |
| Net weight | 2.5 kg |
| Manufacturer | Made in France |
| Origin | France |
| Food contact | Yes |
| Contains wood | No |
Dense refractory wedge brick 220 x 110 x 60 / 40 mm - 35% alumina
Trapezoidal "arch" type dense firebrick, ideal for building vaults and domes in wood-fired ovens, barbecues and rounded fireboxes.
Thanks to its high alumina content, it withstands very high temperatures.
En stock
The minimum purchase order quantity for the product is 3.
Volume discounts
| Quantity | Unit discount | You Save |
|---|---|---|
| 30 | 5% | €8.10 |
| 75 | 10% | €40.50 |
| 150 | 15% | €121.50 |
| 225 | 20% | €243.00 |
| 300 | 25% | €405.00 |
Related products:
Overview:
This "arch" brick is used mainly for laying the rounded, non-flat parts of wood-fired ovens, barbecues and fireboxes, such as vaults, domes, oven mouths, etc.
Thanks to its high alumina content, the product can be in contact with the flames and thus withstands high temperatures over long periods.
It also has excellent mechanical strength
Technical characteristics:
Bulk density: 2.1 g / cm³
Open porosity: 23 %
Mechanical strength: 35 MPa
Pyrometric cone equivalent: 1710 °C
Creep of 0.5% under a load of 2 kg/cm²
Composition:
- Al² O³: 35-37 %
- Ti O² : 1.8 %
- Fe² O³: 2 %
Instructions for use:
- It can be cut using a (wet) table saw or a disposable disc.
- A diamond disc can be used, but it must be watered at the same time, otherwise it would wear out almost instantly.
