Specifications
| Colour | White |
|---|---|
| Grain size | 1 mm |
| Maximum service temperature | 200°C |
| Setting time | 60 min |
| Setting type | Hydraulic |
| Net weight | 25 kg |
| Manufacturer | Rath |
| Food contact | No |
| Contains wood | No |
Documentation:
Creative render technical data sheet
Creative render
All-purpose creative render 0-1 mm- 25 kg bag
Ready-to-use all-purpose universal refractory render for stoves, ovens and fireplaces. The same render is used for the bonding coat and/or the base coat and the finish. Allows a variety of surface textures to be created, and suits all rendering techniques on stoves or fireplaces.
En stock
Volume discounts
| Quantity | Unit discount | You Save |
|---|---|---|
| 5 | 5% | €19.06 |
| 12 | 10% | €91.47 |
| 24 | 15% | €274.41 |
| 36 | 20% | €548.81 |
| 48 | 25% | €914.69 |
Related products:
Technical data:
- Packaging: 25 kg bag.
- Application thickness: up to 60 mm maximum
- Maximum surface temperature: 200°C
- White colour.
- Minimum application temperature: +5 °C
- Consumption (per mm): 1.4 kg/m²
- Maximum grain size: 1 mm
- Drying time: 1 hour
- Shelf life: 12 months, protected from frost.
Properties and applications:
- Suitable for rendering the cladding of stoves and fireplaces
- Rendering of the masonry stove takes place after its first firings, but once the stove has cooled.
- Wait at least 7 days for full setting before using the stove.
Instructions for use:
- Carefully dust the surface to be rendered and clean off any mortar residue.
- The masonry may be moderately pre-wetted.
- Mix the contents of the bucket dry before use
- Mix with drinking water (21 to 27%), leave to stand for about 3 min, then stir again until a lump-free mass forms.
- If the surface is not perfectly flat, the render can be applied in several coats, the first serving to make good any defects.
- Once setting has started, do not remix with water.
- The drying time depends on the ambient temperature, the temperature of the mixing water and the amount of water added, but on average allow 1 hour.
- Wait at least 7 days for full setting before using the stove.
- Many texture / finish effects are possible (scraped, smoothed, floated, tight, brushed, etc.)
- The render can be coloured with heat-resistant pigments
