Specifications
| Material | Grog |
|---|---|
| Appearance | Smooth |
| Colour | Orange beige |
| Length (overall) | 300 mm |
| Width (overall) | 300 mm |
| Thickness | 30 mm |
| Alumina content | 30 % |
| Maximum service temperature | 1640°C |
| Density | 2.1 g / cm³ |
| Quality | Pressed |
| Net weight | 5.90 kg |
| Manufacturer | Made in France |
| Origin | France |
| Food contact | Yes |
| Contains wood | No |
Dense refractory slab 300 x 300 x 30 mm - 30 % alumina
Ideal for building or renovating the firebox of your masonry heater; with its large surface area and its resistance to high temperatures, this slab will greatly simplify building the firebox of your heat-storage stove and of any other wood-burning heating appliance.
Its smooth surface lets it be used as a hearth or baking slab in bread ovens, pizza ovens and so on.
En stock
Volume discounts
| Quantity | Unit discount | You Save |
|---|---|---|
| 20 | 5% | €22.38 |
| 50 | 10% | €111.90 |
| 100 | 15% | €335.70 |
| 150 | 20% | €671.40 |
| 200 | 25% | €1,119.00 |
Related products:
Overview:
This slab can be used to build other parts of your firebox and also for the cladding of your heat-storage stove.
Thanks to its high alumina content, the product can be in contact with the flames and thus withstands high temperatures over long periods.
It also has excellent mechanical strength and is ideal as a baking hearth in a wood-fired oven or a barbecue, for baking bread, pizzas and so on.
Technical characteristics:
- Bulk density: 2.1 g/cm³
- Open porosity: 23 %
- Mechanical strength: 25 MPa
- Pyrometric cone equivalent: 1640 °C
- Creep of 0.5% under a load of 2 kg/cm²
Composition:
- Al² O³: 30 - 32%
- Ti O²: 1.5 %
- Fe² O³: 2.5%
Instructions for use:
It can be cut using a (wet) table saw or a disposable disc.
A diamond disc can be used, but it must be watered at the same time, otherwise it would wear out almost instantly.
