Specifications
| Material | Grog |
|---|---|
| Appearance | Smooth |
| Colour | Beige |
| Length (overall) | 500 mm |
| Width (overall) | 200 mm |
| Thickness | 60 mm |
| Alumina content | 40 % |
| Maximum service temperature | 1750°C |
| Density | 2.25 g / cm³ |
| Quality | Pressed |
| Net weight | 13.5 kg |
| Manufacturer | Made in France |
| Origin | France |
| Food contact | Yes |
| Contains wood | No |
Dense refractory slab 500 x 200 x 60 mm - 40 % alumina
Ideal for building or renovating the firebox of your masonry heater; with its large surface area and its resistance to high temperatures, this slab will greatly simplify building the firebox of your heat-storage stove and of any other wood-burning heating appliance.
Its smooth surface lets it be used as a hearth or baking slab in bread ovens, pizza ovens and so on.
En stock
Volume discounts
| Quantity | Unit discount | You Save |
|---|---|---|
| 7 | 5% | €15.71 |
| 18 | 10% | €80.78 |
| 35 | 15% | €235.62 |
| 53 | 20% | €475.73 |
| 70 | 25% | €785.40 |
Related products:
Overview:
Dry-pressed, this dense refractory slab has a high density and a low dimensional tolerance of around 2 mm.
Its smooth surface makes it an excellent hearth slab for cooking in wood-fired ovens.
It guarantees almost perfect flatness for very thin joints of 1 mm.
Please note: the colour may vary from light beige to orange-beige depending on the firing.
Technical characteristics:
Bulk density: 2.25 g/cm³
Open porosity: 23 %
Mechanical strength: 35 MPa
Pyrometric cone equivalent: 1750 °C
Creep of 0.5% under a load of 2 kg/cm²
Composition:
Al² O³: 40 %
Ti O²: 1.8 %
Fe² O³: 2 %
